Nendoroid Kick Stand

A simple accessory to display a Nendoroid without the official base. There are two parts to this print, a peg and the kick stand. Print the parts in their default orientation, and then snap them together. I recommend printing this in PETG.

Note: May not be compatible with tall Nendoroids, or with capes/back accessories

To assemble, press the kickstand onto the peg:

There is a groove on the bottom side of the kick stand to make inserting the peg easier:

If the parts don't snap together nicely, you may need to adjust the “XY Size Compensation” or similar setting in your slicer.