Print Profile(5)
Bill of Materials
- Superglue x 1:
Description
LUMINOUS MOUNTAINS SILHOUETTE
The model is also designed for printing on small Bambulab A1 mini printers.
The individual parts need to be glued together (the parts contain centering points for easier assembly).
I recommend printing from PETG material, due to heat resistance. The Solid variant can be printed from PLA.
!!Parts marked with the letter T need to be printed from translucent filament.!!
Dimensions
If necessary, the scale can be adjusted.
Mounting points
You can hang the model on nails or stick it with double-sided adhesive tape.
Variants
Horizon
The length of the led strip is 124 cm
The cable can be routed through the center or at the edges
Sun
The length of the led strip is 48 cm
Solid
Electronics
You can use WS2812B RGB LED Strip Light from Bambu lab store
The model is designed for led strips (max 10mm).
I recommend led strips of warm colors (2000-3000 K) or RGB.
Assembly
The parts are described from the back.
For the Horizon variant, the 1T diffuser belongs to part 1, etc.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (125)