Silica Gel Roller
Print Profile(2)
Description
Here you will find a model for drying silica gel. The roller can be easily filled with the beads. Then the lid is screwed on and the hexagon bolt is inserted into the center for securing. This securing prevents unscrewing during the drying process
Now the roller can be inserted normally into the AMS 2 Pro, AMS HT, or Sunlu S2, and it dries the beads. The 0.8mm air slots improve moisture escape. Inside the container, there are three ramps to better distribute the silica gel and allow it to dry thoroughly from all sides
I recommend printing this model from ASA or ABS. Please do not use PLA for this, as this material cannot withstand the high temperatures during drying in the AMS 2 Pro or AMS HT
24.10.2025 Version 2
By request, I have created a second version with a new print profile. The drying roller has changed. Here, the slots under the inner bevels and the inner ring have been removed. Many thanks to @Jobil for this tip
Boost Me (for free)
If you like my model, leave a like or boost me. Thank you and I hope you enjoy the model
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (42)