DeWalt lightbox
Print Profile(1)
Description
DeWalt Lightbox
As a fan of the brand, inspired by the famous DeWalt logo, I decided to make a lightbox.
All elements printed with layer heights:
first layer 0.16mm
each subsequent layer 0.2mm
Frame
I recommend printing with an external brim. The frame is thin where it meets the plate, so the brim will definitely come in handy.
DeWalt logo.
You can choose from two color sets.
Make sure the filament is dry and you've selected the appropriate print temperature to avoid stringing. I assure you, black strings don't look good on yellow.
The filament, which usually prints at 220ºC, I set it to 210°C here, and only then did it work properly. Do your tests
Back
If you do not print the stand, the holes for hanging are provided.
In this element you will stick your LED strip, up to 11mm wide, about 60cm long. Check it first.
Base/stand
The complete kit (frame, back with LED strip and logo) simply snaps into place. After testing, you can glue it on (though it should also stick well without glue, like I did).
Congratulations! You just made your lightbox.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (14)