MaennerWerdenSieben

cover

PXL_20250902_153435480.jpg

PXL_20250902_153453715.jpg

plate_1.png

2025-09-02_bb03aaf0b5f4a8.jpg

0.16mm layer, 6 walls, 15% infill

<h2>🇩🇪 Halterung für Taschenlampe mit Reservebatterien – 3D-gedruckte Lösung für den Zählerschrank</h2>Diese Halterung wurde entwickelt, um eine Taschenlampe samt Ersatzbatterien griffbereit und sicher zu verstauen – idealerweise im Zählerschrank oder in dessen Nähe. So steht im Notfall sofort eine Lichtquelle an zentraler Stelle zur Verfügung.Das Modell ist speziell für die Maglite ML300L mit 3x D-Cell-Batterien ausgelegt. Die Taschenlampe und die Reservebatterien finden nebeneinander Platz und sind jederzeit einsatzbereit.&nbsp;🔧 Die Montage erfolgt wahlweise mit zwei Schrauben oder – wie in meinem Fall – mit doppelseitigem Klebeband. 💡 Praktisch für alle, die ihre Notfallausrüstung clever und platzsparend organisieren möchten.&nbsp;<h2>🇬🇧 Flashlight Holder with Spare Battery Storage – 3D-Printed Solution for Utility Cabinets</h2>This custom holder was designed to keep a flashlight and spare batteries securely stored and easily accessible – ideally mounted inside or near the utility cabinet. In case of emergency, a reliable light source is always within reach.The model is tailored for the Maglite ML300L with 3x D-cell batteries. It holds both the flashlight and spare batteries side by side, ready for use.&nbsp;🔧 Mounting is possible with two screws or – as I did – with double-sided adhesive tape. 💡 A smart and space-saving solution for organizing your emergency lighting setup

<h2>🇬🇧 Flashlight Holder with Spare Battery Storage – 3D-Printed Solution for Utility Cabinets</h2>This custom holder was designed to keep a flashlight and spare batteries securely stored and easily accessible – ideally mounted inside or near the utility cabinet. In case of emergency, a reliable light source is always within reach.The model is tailored for the Maglite ML300L with 3x D-cell batteries. It holds both the flashlight and spare batteries side by side, ready for use.&nbsp;🔧 Mounting is possible with two screws or – as I did – with double-sided adhesive tape. 💡 A smart and space-saving solution for organizing your emergency lighting setup

Print Profile(1)

Description

🇬🇧 Flashlight Holder with Spare Battery Storage – 3D-Printed Solution for Utility Cabinets

Comment & Rating (1)

License

Related Models

Mount for Maglight D-Cell