Firefighter city diorama

Here are the "Minimos", small characters 3 cm tall

With them, you can build an entire world using modular plates

The first part is about "firefighters"

-There are 12 characters with different poses, cute little guys with round faces

-A truck, fire extinguishers, helmets, axes, furniture, flames that you can remove or place on building windows The large flame on the roof easily clips onto the edge of the roof

Make sure your build plate is clean for good adhesion

For trees, traffic lights, helmets, fire extinguishers, axes, firefighter poles, it's best to print at a slow speed

For trees and traffic lights, you may need to sand the base a little to insert them into the holes; the tolerance is tight, so you shouldn't need glue

For the plates, insert them into the holes and twist them slightly so they fit more easily

I've prepared the color scheme to make your life easier :)

For those without an AMS (like me), I've added pauses so you can change filament; if you have an AMS, you can remove these pauses

I printed with a 0.4 mm nozzle!

Other professional versions are planned: (police) (hospital) (farm) … some will connect to this city (firefighter)

If you want other versions, let me know in the comments, and I'll see what I can do :)

Happy printing!