Apollo's Lyre Greek Harp

hi guys i designed this Greek lyre in sculptor bot and Tinkercad I have made it easier for people to print by splitting it into seperate printable parts  

This is a small decorative object designed to look like an ancient Greek lyre. The Lyre of apollo 

• The lyre was a stringed musical instrument used in ancient Greece, often associated with Apollo and the arts.
• The body has a classical shape with two curved arms and multiple vertical "strings" across the middle.

hope you like it as a display piece for you Greek fans out there 

print in seperate pieces all files are included 3mf file is on 2 plates - or you will need to download the 2 stl files seperately 

1 x lyre size - 76mm x 38mm x 120mm

1 x lyre pin holder - 6mm x 8mm x 52mm

15 x pins slot into lyre - 3mm x 46mm 0.8mm

• Print all parts listed above
• insert 1 side of the lyre pin holder into any slot of the lyre then push the other side and it should click into place 
• slot all 15 pins into the lyre holes and your done 

I used bambu lab filaments listed but you can use any

pla gold basic filament

pla white basic filament