Search models, users, collections, and posts
Bambu Lab LED Shield Ventilated Top Glass Riser for X1 and P1 Series
Remixed by
IP Report
Print Profile(3)
0.2mm layer, 2 walls, 10% infill
Designer
9.3 h
4 plates
0.2mm layer, 2 walls, 10% infill
Designer
9.3 h
4 plates
0.2mm layer, 2 walls, 15% infill
Designer
6.7 h
4 plates
Open in Bambu Studio
Boost
86
181
17
12
467
287
Released
Description
Minimalist top glass riser with added ventilation slots and TPU Light Shield, which will support 8 or 10 mm LED's.
For P1 series USB port only use a 5V LED and do not excess the 1.5A of the port, i used and cutted a LED strip like this one:
For full enclosure is better to print it in petg, abs or asa.
Personally used PETG for the structure and TPU for the light shield with the following variation to the standard 0.2 setting in Bambu Studio to apply only for the structure:
Infill: 10%
Support: No supports
Brim: manual, 10mm
This remix is based on
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (17)