Search models, users, collections, and posts
Sunlu S2 Filament Dryer PTFE Tube
IP Report
Print Profile(2)
0.2mm layer, 2 walls, 15% infill
Designer
11 min
1 plate
![0.16mm layer, 3 walls, 15% infill [A1 mini]](https://makerworld.bblmw.com/makerworld/model/USf36a7eaf5f3aa2/design/2023-12-08_f3304732041b4.jpg?x-oss-process=image%2Fresize%2Cw_100%2Fformat%2Cwebp)
0.16mm layer, 3 walls, 15% infill [A1 mini]
11 min
1 plate
Open in Bambu Studio
Boost
267
811
212
40
1.5 k
1 k
Released
Description
Content has been automatically translated.
Sunlu S2 Filament Dryer PTFE Tube
PTFE Tube for filament, which can be moved in all directions, can be created.
The adapter takes a PTFE tube 4x2 mm. This is pushed about 5cm into the interior and about 10cm remain outside (but can be changed at will, shorter or longer).
see pictures
Assembly:
Remove the small PTFE piece and then you can insert the tube with PTFE.
It doesn't matter if the filament is pushed from the top or bottom of the spool through the PTFE tube, both work very well.
created in Fusion 360
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (212)