Andonstar Base Extension - AD246S-M
Print Profile(1)
Description
This extends each side an additional 27.75mm and 31.50mm off the front. I was having issues with some larger boards tilting due to being too close to the edge of the base, and this helped it. Pretty much max size for the P/X series printers without disabling the exclusion zone.
This is meant for the AD246S-M, but may fit other models if the base is the same size (178x198 if I remember correctly)
- Cutout in the back of it for the power cable for the lights.
- Sits flush with the base.
- Extends sides 27.75mm
- Extends front 31.50mm
- Could likely use UV epoxy, electrical tape, or similar to make it more permanent.
Boost Me (for free)
If you like this model, please consider boosting it!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)