ESP32 to Wago221 Breakout

Boxable Wago Breakout,  BWB

ESP 32 , 38 Pin with mounting hole frame, with space for up to  24 ways of Wago 221 on two levels. 

3 x2 ways a side , 2 x 3 ways side , test points exposed or 1 x 5 way a side.

Mounting forks for INMP441 microphone below ESP 32. Designed for WLED, useful for other things.

Socket (ESP32) to Pin (Wago221) Dupont leads , allow solder free hook up.

ESP32 aligned by pins, secure by melting plastic, glue dot or sponge square below lid if using in a box.

Dupont sockets  are captured from falling off when ESP32 is mounted. 

Second layer of 2 x 6 ways of Wago 221 slides in on top, may not be needed in all cases.

Clip for mounting package inside Spelberg IP55 box. Clip out nubs moulded in base before mounting.

Printing profile may throw up overhang warning, it prints fine without any support with 0.4 and 0.6mm nozzle.

Rest is probably OK in PLA , clip should be PETG as needs flex , tight fit with module.