Bow Strings Case - Free 3D Print Model

Search models, users, collections, and posts

TapLAB

Hobby & DIY>Other Hobby & DIY

IP Report

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.2mm layer, 3 walls, 10% infill

Designer

2.3 h

1 plate

4.7(11)

0.2mm layer, 3 walls, 10% infill ...for A1 mini!

Designer

2.1 h

2 plates

4.8(8)

PETG profile for A1 Mini - 0.2mm layer, 3 walls, 10% infill

2.6 h

2 plates

Open in Bambu Studio

Boost

180

235

136

Released

Description

Here is a practical case for your bow strings! It can hold 2 strings and allows you to secure the string by fitting the loops onto the pin without damaging them.

NOTES:
- Ignore any messages about floating parts: no supports are needed!
- Fit the two parts of the container together firmly by pressing down on the pins with the container open.

Boost Me (for free)

if you find it useful and want to support my projects, BOOST IT ! :-)

Comment & Rating (25)

@LALOLALO_M

Print Profile

0.2mm layer, 3 walls, 10% infill ...for A1 mini!

perfetto

The profile uploader has replied

@TapLAB

thank you for the rating!

@RainzMakes

any chance I could get permission to print and sell these? My daughter is on a JOAD archery team with about 20 something recurve kids that are storing their strings in ways they'll eventually get damaged. Thanks.

The designer has replied

@TapLAB

No, but you can print them out and give them away... it won't cost you much and you'll make a lot of kids happy! ;-)

@user_352884571

Boosted

Print Profile

0.2mm layer, 3 walls, 10% infill

the strings are held in place well and it feels sturdy but the closure catch is very loose. I will probably put an elastic band around it to be safe.

@Ohan

Print Profile

0.2mm layer, 3 walls, 10% infill

amazing

@user_2951013312

Print Profile

0.2mm layer, 3 walls, 10% infill ...for A1 mini!

a bit rickety

Show original

@user_3064713346

Print Profile

0.2mm layer, 3 walls, 10% infill ...for A1 mini!

needs to be longer to accommodate my serving

@user_3064713346

nice piece , can you make it an inch or so longer to accommodate serving

@user_2773548097

Boosted

Thank you very much for sharing. The model is excellent, but there was a difficulty with the box's closing mechanism. I put a rubber band on it and it solved the problem, but I think there might be some refinement needed for the closing mechanism

Show original

@kratemis

Print Profile

0.2mm layer, 3 walls, 10% infill

A little small

Show original

@Jiwize

Print Profile

0.2mm layer, 3 walls, 10% infill

Good model, well finished and printed without problem, thank you

(Edited)

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

LED Tea Light suspended

CarstenMK

12.1 k

6.6 k

Sweet Bow Silk Case

汤圆加可乐

1.4 k

1.6 k

Suspended Heart

JonasM

21.7 k

6.3 k

Bambu PLA Temperature Tower (190 - 230 °C)

NutellaPizza

12.4 k

738