Card-Sized Life Counter

Key Features:

I wanted a life counter that’s both practical and nice to look at on the game table.

• Counts from 0 to 99
• Sized like a MTG playing card and fits in deck boxes
• Easy to use with just one hand
• Large enough font to be easily readable
• Quick to assemble (only glue needed, see assembly instructions below)
• Inset font (by 0.2 mm) on the dials allows for multi-color printing without an AMS, as well as clean ironing without smudging the colors
• No supports needed for printing

Assembly Instructions:

Step 1: Put the lower (larger) dial onto the base. It should spin with low friction.

Step 2: Put a small amount of glue on middle shelf of the base.

Step 3: Glue on the cover of the lower dial. It should sit flushly on the middle shelf with the glue. Turn it, until the window cutout is aligned to the left hand side.

Step 4: Slot in the upper (smaller) dial.

Step 5: Add small amounts of glue on the support pillars on the left, as well as on the upper shelf of the base.

Step 6: Stick on the top cover. It has a cutout that helps to position it on the rectangle shape in the middle. Let dry and enjoy!