Holder for Bambu Glues, Alcohol, and Super Lube

This is a small holder I made to hold all the consumables for my printers. The slots are slightly larger than the bottles themselves for a nice fit.

The far left slot is made to fit these 50ml spray bottles I have filled with alcohol: https://www.amazon.com/HAALII-Bottles-Plastic-Refillable-Containers/dp/B0BY2FM9WB. There are several other listings that sell bottles of the same dimensions but these are the ones I used.

From left to right, the slots on the larger tray holds the following:

1. 50ml Spray Bottle for Alcohol
2. 4 US fl oz bottle of Super Lube Multi-Use Synthetic Oil (Part No. 51004)
3. 3 oz Tube of Super Lube Silicone Lubricating Grease (Part No. 92003)
4. Bambu Lab Liquid Glue for Build Plate
5. Bambu Lab Glue Stick for Build Plate

From left to right, the slots on the smaller tray holds the following:

1. 50ml Spray Bottle for Alcohol
2. Bambu Lab Liquid Glue for Build Plate
3. Bambu Lab Glue Stick for Build Plate

The diameter of each slot prints perfectly on my printers, but if you find that the fit is too tight, I have included the original Fusion project file that you can use to increase the diameters of the slots.