Lamborghini Aventador
Print Profile(2)
Description
This model was made by request from @FlatIsBoring. Feel free to message me for any special request of your own.
Feel free to replace the 3rd layer, yellow, with any color you feel like!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x133.33mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
Ā Ā Ā Ā PLA BambuLab Basic Black Transmission Distance: 2
Ā Ā Ā Ā PLA BambuLab Basic Light Gray Transmission Distance: 0
Ā Ā Ā Ā PLA BambuLab Basic Yellow Transmission Distance: 0
Ā Ā Ā Ā PLA BambuLab Basic Jade White Transmission Distance: 4.9
This print uses 4 unique filaments
Swap Instructions:
Ā Ā Ā Ā Start with Black
Ā Ā Ā Ā At layer #8 (0.72mm) swap to Light Gray
Ā Ā Ā Ā At layer #18 (1.52mm) swap to Yellow
Ā Ā Ā Ā At layer #24 (1.84mm) swap to Jade White for the rest.
Ā
Part of the HueForge Hypercar Series
This is one of many high-performance vehicles Iām recreating as multicolor HueForge prints.
Stay tuned for more models in this collection ā including supercars, EVs, and icons from motorsport.
Feel free to follow me or check my profile for new uploads in the series!
Boost Me (for free)
Boosts are the only way I get rewarded for my work. Thanks for printing!
Here's the link to my profile.
Check Out my latest design.
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)