Clamshell casae for Lenovo Legion Go S

I made a 3d printable clam shell case for the GoS. It's printed in 3 parts, the top, the bottom and the latch. Since each half is designed to print as one piece you need a printer like the Bambu Labs P1S/X1C with a print bed of 256x256x256 at minimum. The normal version is 315mm in length. Both versions have to be printed at a 45 degree angle. It slices automatically with no supports added but I added a few in the sliced version for stability due to its size.

I've included the .step files so feel free to remix and add your own style / edits to these designs.

I'm releasing them under a creative commons non commercial with attribution license so selling of prints is prohibited.

Materials used:

- 3x 2.5mm x 30mm stainless steel dowels with a knurl on one end: https://www.amazon.ca/dp/B0BK1PSMZ5

- 4x 6mm x 1.5mm circular magnets - I purchased 6mm x 2mm but they measured in at 1.5mm so its designed with 1.5mm thick magnets in mind. I can upload a 2mm hole size if anyone needs: https://www.amazon.ca/dp/B07BJFD6FL

- 2x 4in x 4in x 1/16in foam pads: https://www.amazon.ca/dp/B0CSJS41Z1