Bookmark Magma Bubbles

Print at 100% infill with a layer height of 0.12mm with a base layer of 0.24mm

The Model is 50x150mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.28mm and the Actual Thickness is 2.27989mm

Filaments Used:
    #000000 PLA BambuLab Matte Charcoal  Transmission Distance: 0.6
    #de4343 PLA BambuLab Matte Scarlet Red  Transmission Distance: 2
    #f99963 PLA BambuLab Matte Mandarin Orange  Transmission Distance: 3
    #ffe17f PLA BambuLab Matte Lemon Yellow  Transmission Distance: 4
    #ffffff PLA BambuLab Matte Ivory White  Transmission Distance: 3.5
This print uses 5 unique filaments

Swap Instructions:
    Start with Charcoal
    At layer #6 (0.84mm) swap to Scarlet Red
    At layer #8 (1.08mm) swap to Mandarin Orange
    At layer #10 (1.32mm) swap to Lemon Yellow
    At layer #14 (1.8mm) swap to Ivory White for the rest.