NFL Stadiums Hueforge 200mmx115mm (NFC East)
Print Profile(1)
Description
Project: Eagles.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x100mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm
Filaments Used:
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#3f8e43 PLA BambuLab Basic Mistletoe Green Transmission Distance: 1
#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Mistletoe Green
At layer #11 (0.96mm) swap to Blue Gray
At layer #17 (1.44mm) swap to Jade White
This slider is set higher than the mesh depth. It is not affecting your final mesh. Consider removing it.
Border Only Colors from here until the end.
At layer #27 (2.24mm) swap to Mistletoe Green for the rest.
Boost Me (for free)
Any boost would be greatly appreciated!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)