Biscoff Fridge Magnet

I Was bored and thought of this. It's a simple fridge magnet in the shape of a Biscoff Cookie. This was pretty simple to design. I just traced an image of a biscoff cookie in Fusion360, then did some magnet magic in Bambu Studio and it was done. This can hold moderately heavy pictures or card stock. But I wouldn't recommend trying to hang anything that you wouldn't normally use a fridge magnet for. Of course you could also just use it for display. The print itself is pretty simple. It only takes a little under 25 minutes and 8 grams of filament with a pause on layer 13 so you can insert the magnet. The tolerances for the magnet were meant to be tight but not crazy tight. So you have to use a little force to get the magnet in. Once the magnet is in securely just press resume and you're good to go. The magnet I modeled this after are the 8x2 magnets from Bambu Lab. But I can make versions for other sized magnets if requested. 

As always please let me know if you have any questions, concerns, comments, etc.

Enjoy,

Leopardgeckoguy