LED Lighting Side CO2 Laser
Print Profile(1)
Bill of Materials
- Magnete 10x3mm x 4: https://www.amazon.de/dp/B0C395H1Y1?th=1
- LED-COB 8mm x 1: https://www.amazon.de/dp/B0BQQXBYSC?ref=ppx_yo2ov_dt_b_fed_asin_title
Description
Boost Me (for free)
If you like my designs and my work, I would be very happy about a like, a comment, and a boost. Thank you :-)
LED Lighting Side CO2 Laser
I designed the "LED Lighting Side" to attach an 8mm COB LED strip to my CO2 laser.
The single rear lighting was not enough, which is why I needed additional light on the left and right.
The strip is separated and can be joined together with connectors.
The complete strip is attached with 4 pieces of 3x10mm magnets.
The COB LED strip is then simply glued onto the strip.
The angle of the LED strip is 30 degrees.
The strip is divided to allow it to be printed on an A1 mini as well.
Dimensions:
Basic measurements: approx. 385x15x15mm (Total length)
Printed in Eryone PETG-Standard black
Used Magnets:
4 pieces (10x3mm) from https://www.amazon.de/dp/B0C395H1Y1?th=1
Used LED COB Strip:
1 piece from https://www.amazon.de/dp/B0BQQXBYSC?ref=ppx_yo2ov_dt_b_fed_asin_title
Good luck with printing and have fun with the product.
Boost Me (for free)
If you like my designs and my work, I would be very happy about a like, a comment, and a boost. Thank you :-)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)