FireFox - HueForge Print

A fiery fox for your HueForge print needs! Using HueForge's metallic Brightness Comp to experiment with, I think I've managed to achieve a rather natural looking fire effect around the fox.

The 3MF will have settings already preloaded for you. Otherwise, use the STL with the instructions below!

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm

Filaments Used:
- PLA BambuLab Matte Charcoal Transmission Distance: 0.6
- PLA CC3D Orange Transmission Distance: 7.4
- PLA CC3D Lemon Yellow Transmission Distance: 8
- PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
- Start with Charcoal
- At layer #7 (0.44mm) swap to Orange
- At layer #21 (1mm) swap to Lemon Yellow
- At layer #37 (1.64mm) swap to Jade White for the rest.

_______________________________________

If you'd like to support me, I now have a Patreon!

Joining will give you behind the scenes information on WIPs, access to a private discord, early access, includes models that are otherwise paid, and more!

If you want to sell any physical models I have uploaded anywhere, an unrestricted commercial license is available on the $10AUD tier of my Patreon!

_______________________________________

If you like my work and would like to support me, you can now subscribe to a Thangs membership plan!, or if you prefer, my Patreon.

Joining will give you access to a private discord, all paid models, early access to some models as well as a commercial license to sell the physical prints of my models.