Bambu Lab Spool core / Spool insert with RFID chip

Hello

When I realized that generic filament had very poor settings for flow and print speed in its profile, the desire grew in me to be able to use the good values when I use other manufacturers, without having to check every time in the slicer that everything is set correctly. In addition, my two favorite suppliers always fixed the end of the filament in the spool with a hook, which always caused disturbances, and I rewound it beforehand anyway every time. The easiest way, of course, is to simply reuse the RFID chips and thus use the good filament settings from Bambu Lab. This model is now my revised solution for my model. I have incorporated designations for: Material, Color, and Order Number as indentations in the spool, so you also know what is on the RFID chip. You can change the text as you need it. After making changes, you only need to make a few clicks for everything to fit again. You can see this in the pictures. I am also attaching a print profile for the two-color version, so you can highlight the text in color. However, this will stand a few tenths of a millimeter off the spool, but it does not affect the function. For each modified text block, please briefly set the mode to "not surrounded" and then back again; this will adjust the changed text to the spool again (see pictures). If you want to use the AMS profile, you must ensure that "Part" is selected at the bottom of the text window (see last picture). I use PETG or ABS for printing due to the higher temperatures during drying. I hope you like my model. 

I would be very grateful for your support. Thank you

My special thanks go to the two creators who inspired me to create my model

https://makerworld.com/de/models/24264-bambu-lab-spool-insert-for-manual-winding#profileId-21476

https://makerworld.com/de/models/1059324-bambu-lab-spool-insert-core#profileId-1047371

This image concerns AMS