BRICK - DUPLO - BOAT - Free 3D Print Model

Search models, users, collections, and posts

JB603

Toys & Games>Other Toys & Games

IP Report

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

A1 mini

ALL MATS (ABS/PLA/PETG) 0.2mm layer, 2 walls, 20% infill

Designer

9.4 h

3 plates

5.0(6)

Shorter Boat - 0.2mm layer, 3 walls, 15% infill

3.8 h

1 plate

4.8(11)

Open in Bambu Studio

Boost

118

408

401

274

Released

Description

Model

This is a BRICK ("l e g o" DUPLO - BOAT model for children.

Print Settings:

Rafts: No

Supports: No

Resolution: 0.20

Infill: 20%

Comment & Rating (41)

@d_wittman

Printed beautifully in ABS. I printed it with the included settings but increased to 3 walls. It would be perfect if the front-most studs were usable. a block can't quite snap on the front two studs.

The designer has replied

@JB603

I understand, I drew the model for printing on other printers such as Prusa. They are not that big for the printing area. A classic cube might not click into place because of the corner, but I drew the ship for my daughter so she could put Lego figures and animals in it and they can be put in all positions. However, I can also adjust it for the cube in the first position.

@d_wittman

Replying to @JB603 :

It’s been fantastic. We have one in the pool and the one we had in the bath got relocated to the Lego table because the kids like it so much.

@empty.beer

Boosted

great model! If you adapt the height at the back so that it is the same as two Duplo bricks stacked on top of each other, it would be perfect. :) and no brick fits at the very front, despite the holes

(Edited)

Show original

@HuebiJan

The print profile is no longer public

Looks fantastic, integrates perfectly with Duplo bricks, and even floats! Thank you for this!

Show original

@saundebn

Print Profile

ALL MATS (ABS/PLA/PETG) 0.2mm layer, 2 walls, 20% infill

Printed on an H2D using Bambu Lab PLA Gradient filament. I did reduce the infill to 12% and used gyroid instead of grid.

@dtr4in

Print Profile

Shorter Boat - 0.2mm layer, 3 walls, 15% infill

my granddaughter lives it.

@marty_

Print Profile

Shorter Boat - 0.2mm layer, 3 walls, 15% infill

Excellent model that the children adored! Printed with a black spool

Show original

@JJ.Grasnarbe

Boosted

The print profile is no longer public

richtig schönes Boot! bin auf das erste Bad gespannt es misst 26cm und gedruckt habe ich es in PLA Habe einen Farbwechsel eingebaut, kann gern das Profil veröffentlichen :)

@user_2901962031

This boat looks great. Where can I find the larger version of the boat? I only find the shorter version.

The designer has replied

@JB603

I don't think you will find a bigger DUPLO ship model in one piece. smaller ones, yes, someone already posted them, but my daughter wanted a bigger one. That's why I drew this one. The reason for this is the press space.

@user_2901962031

Thank you for your reply. I want to print the boat of the picture. The problem is that in the printing profile there is only a shorter version. In the text of the print profile it also says short version. So where can I find the longer model of the picture?