Vaporesso GEN200 car holder

EDIT : The PLA shrank with the heat, so I added 0.5 mm all around.
The "Strength" mode was useless—I switched back to a standard mode (with extra walls).

Hello everyone!
First upload for me ^^ A pretty simple object: a stand for the Vaporesso GEN200. It’s sized to fit a standard 33cl can.

I made a recess so the GEN200’s button sits almost flush. You can shorten the height if you want, but be careful—not too much or the button might hit the edge of the insert.

I printed it in matte PLA, using the 0.20 Strength preset. I slightly reduced the speed of the first layer.
I also tested it with PETG and it works perfectly.

If you want to print it with a textured build plate (like in my photo with the carbon effect), just flip the model upside down before printing. No supports needed, even when printing it upside down.

If you have any questions, feel free to ask!