Search models, users, collections, and posts
Scooter smartphone holder
IP Report
Print Profile(1)
0.2mm layer, 6 walls, 25% infill
Designer
3.2 h
1 plate
Open in Bambu Studio
Boost
6
12
0
1
8
6
Released
Bill of Materials
List other parts
- molla di trazione 50.8mm x 1:
- viti 2.5x10 mm x 4:
- bullone 3X40 mm x 3:
Description
Content has been automatically translated.
modular scooter smartphone holder, attaches to the mirror stem. For assembling the parts, I used a 50.8mm long spring, 4 screws for closing the upper and lower parts with a diameter of 2.5 mm and length of 10 mm. For fixing the arm, I used 3 mm diameter bolts. Maximum phone dimensions 80x180 mm. Printing in PRTG or more performant materials is highly recommended as the object is exposed to external agents and stresses such as vibrations and wind pressure.
I have been using the holder for a few months without problems.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (0)