Search models, users, collections, and posts
Print Profile(1)
0.16mm layer, 3 walls, 8% infill
Designer
12.9 h
1 plate
Open in Bambu Studio
Boost
288
702
29
17
307
131
Released
Description
Superman Can Holder
Fits long EU cans with a capacity of 0.5L. You can also use my insert for 12oz or 330ml (slim) cans (link below)
Recommended print settings: PLA, 0.16mm layers, 2walls, 8%gyroid, Automatic Tree supports (at least 32°)
Or just use my profile
If you want to have the handle on the opposite side, just right-click on the object in the slicer and put mirror by the Y axis.
Here is the link to my model of the insert that you can use in 0.5L holders with your 12oz , or 330ml slim cans, and 10mm riser if you want better access to the top. They are scalable, so you can make them smaller or larger in your slicer.
happy printing:)
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (29)