Lightweight Infinite Skadis 240x240mm
Print Profile(5)
Bill of Materials
Description
A Skadis-compatible pegboard panel that prints in one piece on the A1, P1, or X1. Panels connect seamlessly edge to edge. Mount as many as you need to cover any wall space. The 120 Pack expansion adds three additional sizes: 120x240mm (Vertical), 240x120mm (Horizontal), and 120x120mm (Gap Filler) to help fill awkward gaps on your wall.
Panel size: 240x240x5mm. Nine mounting points for better stability. The infill pattern is fully visible from the front, so your choice of pattern (honeycomb, cross hatch, triangles) directly affects the look of the board. Cubic infill cuts print time almost in half compared to honeycomb. A print profile for it is included.
Five panel variants available: basic version with 4 holed standoffs, with four standoffs and four additional standoffs for heavier load, with four screw holes (no standoffs), without holes and without standoffs, and 8 holed standoffs.
Note: If you slice using the Handy app on P1/X1, the print profile will fail without any meaningful warning. This is a limitation of the Handy app, not the profile itself. Use the desktop Bambu Studio instead.
For easy alignment just check: Infinite skadis Alignment Tool
If you want to reduce number of wall holes check: Lightweight Infinite Skadis Multi Panel Mount
Want to mount your panel without drilling? Check out the Lightweight Infinite Skadis Wall Mount - No Screws
New to Lightweight Infinite Skadis? Start here:
Customization
For Bambu Studio, check the Strength tab, under Sparse infill:
- Sparse infill density controls how dense the grid is.
- Sparse infill pattern allows you to choose the visual style (e.g., honeycomb, cross hatch, triangles).
Updates
Update 15/03/2026: Updated cubic print profile. Added four panel variants (5 in total):
- basic version - 4 holed standoffs (old)
- with four standoffs + four additional standoffs for heavier loads
- with four screw holes (no standoffs)
- without holes and without standoffs
- 8 holed standoffs
Go and grab Cubic infill, significantly reduced print time pirint profile ;)
 | 
|
 | 
|
 |
 |
Update 03/03/2026: All models in 120 pack now have spacers with a length of 12 mm. Thanks to @user_2727795016 for noticing the problem.
Update 25/01/2026: Introducing the "120 Pack" Expansion!
The Lightweight Infinite Skadis family just got a lot more flexible. While the original 240x240mm panels are great for covering large areas quickly, I know that real-world walls aren't always perfect multiples of 240. To help you fill those awkward gaps and maximize every inch of your workspace, I’ve released the Lightweight Infinite Skadis 120 Pack.
This upgrade includes three new panel sizes designed to fit perfectly with the existing system:
- 120 x 240 mm (Vertical)
- 240 x 120 mm (Horizontal)
- 120 x 120 mm (The "Gap Filler")
Big shout out to @fbgencer and @Webster43 for the inspiration!
The models are in separate print profile on the right side ;)
 | 
| 
|
 | 
| 
|
Update 08/01/2026: Missing chamfers have been added to the holes (all print profiles covered). Big thanks to @user_2638956414 for pointing it out!
Update 06/12/2025: print profile for the P1 / X1 series sliced through the Handy app will fail without giving any meaningful warning. This is a limitation of the Handy app, not an issue with the profile itself. In this case, I recommend using the desktop Bambu Studio to slice and print this model.
Update 11/11/2025: Switching to cubic infill significantly reduces print time, almost by half compared to the default honeycomb pattern! A print profile using this infill has been added. Big thanks to @melvinkeoh for pointing it out!
Update 04/09/2025: The countersink section of the screw holes has been enlarged, ensuring a better fit for countersunk screws.
Update 29/08/2025: Added print profile for P1 and X1 series. If you have problem wiht printing on X1 just open printer settings and remove contents of ‘Bed excluded area’ in printer setings.
Important Notes
1. On Bambu Lab P1 and X1 series printers, there is a print volume limitation. To print this model, you need to disable the print volume limit. More details can be found on the official wiki: Bambu Lab – Print Volume Limitations
Print profile for the P1 / X1 series sliced through the Handy app will fail without giving any meaningful warning. This is a limitation of the Handy app, not an issue with the profile itself. In this case, I recommend using the desktop Bambu Studio to slice,
2. The model is large and requires very good bed adhesion, so make sure your build plate is clean and properly prepared before printing!
Customization
Customization is possible directly in your slicer. For Bambu Studio, check the Strength tab, under Sparse infill:
- Sparse infill density controls how dense the grid is.
- Sparse infill pattern allows you to choose the visual style (e.g., honeycomb, cross hatch, triangles).
If you print it, please leave a make or rating. It helps a lot.
Boost Me (for free)
Hey! All my models are designed in the stolen hours between work, sleep, and pretending I'll go to bed early. Everything here is free - if something saved you a trip to the hardware store or just made your day a little easier, a boost is a great way to say thanks. Got questions, feedback, or a wild idea? Drop me a DM - I read everything, eventually. Thanks for stopping by!!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (893)