Daystate Alpha/Delta Wolf Large Cocking Handle Mk2

This remix or Mk2 version utilises a rotating outer shell for the larger lower part of the handle, making it slightly nicer to use, the handle stays in the same position in your fingers as you open and close the bolt instead of rotating against your fingers causing friction.

I might look to make the upper part of the handle rotate also, the jury is still out on that one. In all other respects it is the same as the original.

The Mk2.1 has minor improvements, the rebate for the allen head is deeper to provide a longer screw depth when using the standard 20mm stud, better adhesion for the bottom hat of the inner piece.

Daystate Alpha/Delta Wolf or BRK Ghost Large Biathlon Cocking Handle Mk2

The new Daystate (2025) Delta Wolf Performance is now equipped with a large cocking handle but just the lower part, I fancied a handle which has both the top and bottom parts.

I have printed it in PLA but a better outdoor filament may be preferred, not PETG as its too shiny (you could paint it satin?)

I used the original M4 x 20mm allen stud and let it cut its own threads in the lower part, but for a more substantial attachment replace this stud with a M4 x 25 socket head cap screw in Black.

You can reduce the length of the lower if you wish to make access to the safety easier but I manage fine with it at 50mm as per the original.

Fits: Daystate Alpha Wolf, Daystate Delta Wolf, BRK Ghost