Search models, users, collections, and posts
BB-MP9 MINI (Replica/Cosplay Prop)
IP Report
Print Profile(3)
MAIN PARTS - 0.16mm layer, 5 walls, 20% infill
Designer
15.7 h
4 plates
TPU FOREGRIP SLEEVE - 0.16mm layer, 3 walls, 10% infill
Designer
1.5 h
1 plate
Modified for easier assembly/Tolerances modified for easier assembly
21.5 h
9 plates
Open in Bambu Studio
Boost
387
697
56
13
590
123
Released
Description
BB-MP9 MINI:
The BB-MP9 is a prop gun for cosplay or display purposes. Heavily inspired by the Brugger & Thomet MP9 submachine gun, but with some obvious differences. This was just a quick model I made for fun, while working on a more difficult project so I will most likely not be updating it any further.
Recommended Filament Type: PLA+ or PETG
- Foregrip Sleeve must be printed in TPU or it will not be able to fit onto the foregrip frame.
Required Hardware:
8 x M3*6 bolt
2 x M3*10 bolt
1 x M3*12 bolt
4 x M3*15 bolt
2 x Pen Springs (1 for the trigger and the other for the magazine release)
1 x Compression Spring: OD: 10mm, WD: 0.8mm, Length: 50mm
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (56)