Thermos cup holder for Simple Modern Trek 40oz

Thermos cup holder for the Simple Modern Trek 40oz model 🇺🇸

This holder is made with a series of stops to avoid scratching the edge of any table, and two screws and pressure-distributing plugs so that all stresses are distributed evenly.

I recommend using felt on the base of the upper holder that rests against the wood to prevent scratches and the piece from marking the wood when tightening the screws.

I recommend using the default profile settings of 0.24, 25% infill (to keep it lightweight but still maintain strength), tree-type supports for the main frame, strong filament like PLA+, and a cold tray to prevent high temperatures in the chamber. The main part takes 12 hours to print, and the screws take 3.5 hours.

The screws are difficult to tighten; I recommend tightening and loosening them several times until they rub hard enough and turn freely and easily.

This stand is specifically designed for FlexiSpot tables, but is compatible with any other table made of similar wood, meaning it should be smooth and have no ridges on the front.

Thermos cup holder for the Simple Modern Trek 40oz model 🇪🇸

The holder is made with a series of stops to prevent scratching the edge of any table, and two screws and pressure-distributing plugs so that all stresses are distributed evenly.

I recommend using felt on the base of the upper holder that rests against the wood to prevent scratches and the piece from marking the wood when tightening the screws.

I recommend using the default profile settings of 0.24, 25% infill (to keep it lightweight but still maintain strength), tree-type supports for the main holder, strong filament like PLA+, and a cold tray to prevent high temperatures in the chamber. The main part takes 12 hours to print, and the screws take 3.5 hours.

The screws are difficult to tighten; I recommend tightening and loosening them several times until they rub hard enough and turn freely and easily.

This holder is specifically designed for FlexiSpot tables, but is compatible with any other table made of similar wood, meaning it should be smooth and have no ridges on the front.