Toolhead front housing cover - no logo - Free 3D Print Model

Search models, users, collections, and posts

PRINT3DGIFTS

3D Printer>3D Printer Parts

IP Report

Print Profile(1)

All

P1P

P1S

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

1.2 h

1 plate

4.7(36)

Open in Bambu Studio

Boost

166

351

703

263

Released

Description

IMPORTANT!!

**UPDATE**

02-02-2024 - Added a No Logo version

This will print the best on an SLA printer because of the shape of the design and supports.
Printing it on your FDM printer will have not the nicest finish and requires post processing in most cases(sanding/smoothening/painting).
So only print this if you read and understand that it's a print that needs work afterwards.

BOM:
4mm x 2mm magnets (2*)

Comment & Rating (55)

@BOORG

Print Profile

0.2mm layer, 2 walls, 15% infill

Saved the day! I messed up the cover on my printer, replacement is a week out, this got me printing again in a matter of hours!

@SigmaPrinter3d.

i feel you buddy, having the same problem happening right now. do you know if the snow fan fits snug on this, because most other design are a bit too low on my p1s

(Edited)

@qingwen

printed out great, by supports broke halfway so stopped the print. printed with Bambu PLA Basic Green, 0.4 Nozzle, 0.1 layer height.

@user_3148020437

How did you do the Hex face?

@adooley1684

Print Profile

0.2mm layer, 2 walls, 15% infill

@threedee

glow in the dark is a brilliant idea

@user_3848832381

Print Profile

0.2mm layer, 2 walls, 15% infill

nice 👍, printed ABS

@ATC_OFFROAD_BMP

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed with Bambu PETG Basic Green on a Smooth High Temp plate, 0.4mm Nozzle, and 0.20 for the layer height and I ended up with a nice usable replacement front cover for my X1C with very minimal clean up or work after printing, NICE!

(Edited)

@Qmax3D

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

perfect fit

@grimgprr

Boosted

Thank you so much.excellent print and works perfectly. I did this with 2mm nozzle and Bambu translucent blue petg.

@S.janatzek1988

Print Profile

0.2mm layer, 2 walls, 15% infill

thanks 🙏 would recommend to use a 0 2 mm Nozzle

@carlchanhm

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Very nice ...

(Edited)

@giusto.tommi

Print Profile

0.2mm layer, 2 walls, 15% infill

ok nice

(Edited)

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.