Using an SMA long antenna, in unobstructed conditions during long-distance navigation, the signal loss can be considered negligible.

H.Warp FPV

Hi, that O4 setup is very interesting. How does it work in long range? Have you tried it long range? My question is regarding the antenna setup: do I lose some range or is it better to place them in the back?

user_2537651058

cover

71b5b314dd7c0b08cfd23438ae3cde28.jpg

60488bb47550fce8a46257f483f58143.jpg

plate_1.png

2025-08-28_b21c22d56c3468.png

需要使用硬质材料，设置实心打印

Use rigid material, set to print solid

0.2mm layer, 4 walls, 100% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<h2>马里奥8换头计划</h2><boostme><boosttitle>为我助力</boosttitle><boostcontent>如果对你有帮助，请支持我进行更好的创作</boostcontent></boostme>你需要准备6mmM2铝柱*2，16mmM2铝柱*2（其他更高的高差为10的也可以），沉头M2螺丝两个，杯头M2螺丝四个，M2垫片四个（可以不装），M2*4*3热熔螺母两个需要使用硬质材料打印，碳板需进行切割或更换鸣谢牛步拉吉兄弟提供的数据以及测试

<h2>Mario 8 Head-Swap Project</h2><boostme><boosttitle>Boost Me</boosttitle><boostcontent>If this helps you, please support me for better creations</boostcontent></boostme>You will need two 6mm M2 aluminum posts, two 16mm M2 aluminum posts (other taller posts with a 10mm height difference are also acceptable), two M2 countersunk screws, four M2 cap head screws, four M2 washers (optional), and two M2*4*3 heat-set insertsRequires printing with rigid materials, the carbon plate needs to be cut or replacedThanks to Niubulaji Brothers for providing the data and testing

Print Profile(1)

Description

Mario 8 Head-Swap Project

Comment & Rating (2)

License