Simple Single-Shot Pistol - Compatible with True•Bullet, No Hardware Needed
Print Profile(2)
Description
2025.12.21 Update: Added different scaled versions of pins, for printing when the assembly is too loose or too tight
2025.09.21, the main improvement addresses the issue of bullets falling out when shaking the barrel after loading now after loading, shaking the barrel (you need to be quick, as the retention force is quite strong) allows you to close it without needing assistance from the other hand, making the action cooler The principle is moving the pivot point backward so that when shaking the barrel, the bullet's center of gravity remains inside the chamber Additionally, the diameter of the rifled barrel has been increased to reduce the bullet head hitting the rifled barrel and decelerating during firing
2025.09.09, no update, just uploaded the source files, gun enthusiasts are welcome to improve it ^_^
Caution! Caution! Caution!
The model poses certain dangers when loading the bullet and after the bullet is loaded, do not point it at people, animals, or other fragile items (such as computer screens, televisions), to prevent accidental discharge causing injury or property damage If improper use results in damage or loss, you are solely responsible for the consequences, and I bear no liability
The model poses certain dangers when loading the bullet and after the bullet is loaded, do not point it at people, animals, or other fragile items (such as computer screens, televisions), to prevent accidental discharge causing injury or property damage If improper use results in damage or loss, you are solely responsible for the consequences, and I bear no liability
The model poses certain dangers when loading the bullet and after the bullet is loaded, do not point it at people, animals, or other fragile items (such as computer screens, televisions), to prevent accidental discharge causing injury or property damage If improper use results in damage or loss, you are solely responsible for the consequences, and I bear no liability
Important things must be stated three times
————☆————Dividing Line————☆————
This model gun was developed to be compatible with my True Bullet Bullet links are as follows:
True Bullet Reloadable Firing No Hardware Required from Tianfu MakerWorld: Free 3D Model Download
The principle is somewhat like a single-shot shotgun, no hardware required, and assembly is very simple As shown in the figures below, simply place each part into position and then press them together (if loose, you can secure it with glue):
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (24)