光之造3D打印机恒温控制器倒放支架AUERVO Lightweight 3D Printer Thermostat Temperature Inverted bracket

光之造 3D打印机 恒温控制器 倒放支架，风口向下吹，稀疏填充密度2%，打印进度到50%暂停打印，往填充空格里注满水，继续开始打印，相当于给底座配重。

AUERVO Lightweight 3D Printer Thermostat Temperature Inverted bracket, with the air vent blowing downwards, resulting in a sparse filling density of 2%. When the printing progress reaches 50%, pause printing, fill the filling space with water, and continue printing, which is equivalent to adding weight to the base.

光之造 3D打印机 恒温控制器
淘宝地址：https://item.taobao.com/item.htm?id=668772437486&scene=taobao_shop&spm=a1z10.1-c-s.w4024-24559865311.1.74ec284cH5P5qf

This mount is designed to holster this chamber heater:
https://www.amazon.com/dp/B0BRK7K2VW?psc=1&ref=ppx_yo2ov_dt_b_product_details