No Duct Whoop Mount for Flywoo Wide Angle DJI O4

NOW INCLUDES ADAPTER TO USE THE NEW FLYWOO WIDE ANGLE LENS (MUCH BETTER) WITHOUT THEIR HEAVY BACK PIECE

Have you used the Flywoo lens adapter and are tired of seeing all duct?
Do you want to use your 1S drone as a mini cinewhoop that has more FOV?
This print is for you!
You will need the Flywoo wide angle lens adapter, the plastic camera holder (until I make a print for that as well), some m1.4 or m1.6 screws at the bare minimum 8mm long, and some TPU.
Put the camera cushion into the frame as the TPU will sag over time and it will also provide a little additional protection in crashes if the camera bounces around. The camera mount screws into the holes that are just outside of where the FC screws go and I recommend screwing up through the bottom or you will need very long screws.
Both MoeFPV and I have printed at 100% infill and we both are still able to achieve stabilization.
Here's a post we collaborated on giving a quick showcase of what it can look like. Plenty more footage to come so please check out MoeFPV on Instagram and Youtube.
https://www.instagram.com/p/DM8Pi-NRzrM/?utm_source=ig_web_copy_link&igsh=MzRlODBiNWFlZA==
https://www.instagram.com/moefpv?utm_source=ig_web_button_share_sheet&igsh=ZDNlZDc0MzIxNw==
https://www.youtube.com/@MoeFPV

If you want to help out please use my BetaFPV affiliate link when buying from them. It costs you nothing but I get a small percentage that goes straight back into buying FPV gear:
https://betafpv.com/tcmore

Thanks Jazz.elv and Ghasty_FPV on Instagram for the photos of the new version that works on the 45mm Mobula 7 and 8 frames from happymodel.