Geometric Rose – 3D Printable Sculpture - Free 3D Print Model

Search models, users, collections, and posts

Disaster

Art>Sculptures

IP Report

Print Profile(1)

All

H2D

P1P

H2S

H2D Pro

A1 mini

X1 Carbon

P1S

X1E

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

2.7 h

1 plate

4.2(61)

Open in Bambu Studio

Boost

811

1928

1.3 k

770

Released

Description

When you remove the support please hold the top of the rose !!

Title: Geometric Rose – 3D Printable Sculpture
This elegant low-poly rose sculpture combines geometric beauty with modern minimalism. The clean folds and sharp angles give it a unique, stylized look – perfect as a decorative piece, gift, or test print. Designed for FDM printing.

Optimized for PLA
Best printed at 0.16–0.2 mm layer height

🌱 Simple to print, beautiful to display.

Comment & Rating (94)

@rw11

Print Profile

0.2mm layer, 2 walls, 15% infill

It breaks when the supports are removed.

The profile uploader has replied

@Disaster333

you need to hold the top when you remove support

@Disaster333

not bottom

@Disaster333

sorry about that

@Ironstarr

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

The profile uploader has replied

@Disaster333

thanks 🙏

@Ironstarr

Boosted

Replying to @Disaster333 :

Absolutely beautiful file!! I wanted to try some new pla and couldn't think of a more perfect file for.

@Pieronani

How did you change the color Thank you

Show original

@joshua_loke

Print Profile

0.2mm layer, 2 walls, 15% infill

(Edited)

The profile uploader has replied

@Disaster333

thanks

@Andre182

Print Profile

0.2mm layer, 2 walls, 15% infill

I made it for my wife and she loved it

Show original

@slippergypsy

Print Profile

0.2mm layer, 2 walls, 15% infill

Couple of rough edges in the model that could do with cleaning up, i also managed to save quite a bit of time and filament setting supports to critical and build plate only, the back of the flower comes out pretty rough could look at increasing the wall loops or something. came out nice otherwise.

@finnwii3d

Print Profile

0.2mm layer, 2 walls, 15% infill

turned out well.

The profile uploader has replied

@Disaster333

thanks 🙏

@user_3043442819

Print Profile

0.2mm layer, 2 walls, 15% infill

Beautifull model and print. It was a bit challenging to separate supports, but it can be expected given the shape. Many thanks!

The profile uploader has replied

@Disaster333

thanks 🙏

@Metamorphose3d

Perfectly printed and then painted with acrylic markers

The designer has replied

Show original

@Disaster333

Thank you

@Meatheado

Print Profile

0.2mm layer, 2 walls, 15% infill

just a couple stubborn support issues but it printed great. Thank you!

@DiQuirke

Lovely print but where the leaves and head of rose attach it is very thin, so much so that they were wobbly and unstable before I even attempted to take the supports off then when I did take the supports off they just fell off 😞 I managed to save it by heating the stems where they attached and holding them in place until it cooled.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Bouquet of Roses

Golub17

45.6 k

12.8 k

Rose Bear

Kocyns

32.6 k

8.7 k

roses with 5 types of stem ( no support )

Anko

35.3 k

14.8 k

Heart with Rose Sculpture

3D Drucker

6.3 k

2.4 k