Pollen press with customizable stamp

- INFO: I have recreated the lid because it was difficult to unscrew by hand. The description still refers to the old lid. -

- Accessories: 

• I have also created a folding box for storage. --> https://makerworld.com/de/models/2008188-folding-box-for-pollen-press#profileId-2163021

• I have also created a small stamp collection → https://makerworld.com/de/models/2023993-stempel-sammlung-fur-pollen-presse#profileId-2181834

This pollen press allows for easy and clean pressing of pollen. It is easy to handle and features a customizable stamp. Two stamps are included in the scope of delivery:

• a stamp with a star motif (as seen in the photos)

• a blank stamp that can be individually customized, for example, in Bambu Studio

Assembly & Application

Assembly:

• For assembly, only a standard bearing is required → https://amzn.to/41Yegix . This is pressed into the top part.

• The stamp should be covered with cling film and inserted into the bearing.

  

• Due to the chosen shape, the stamp can be removed and replaced with a small flat-head screwdriver or similar tool.

• At the bottom end, the cap is screwed on, lined beforehand with baking paper to prevent the pollen from sticking.

  

• Afterwards, the pollen is filled into the threaded tube and the rotating cap with the inserted stamp is screwed on from above.

• To press, simply tighten firmly – but without excessive force.

• Afterwards, the bottom lid can be removed, and by further turning the top part, the finished pressed puck is pushed out at the bottom.

  

Note
-The baking paper should be cut slightly larger than the stamp. Absolute precision is not necessary.

-Supports are needed, stamps should be printed with the motif facing up.

-Used Filament: PETG