Lumia 1020 C-mount Lens Adapter Module Modification

This model can be used to modify the C-mount lens for Nokia 1020 phones to fully utilize its superior shooting performance. Users need to remove the lens group of the rear camera of the phone, leaving only the CMOS. Print all the parts, purchase a C-mount to C-mount (C-mount extension adapter ring), tighten and secure it to the 3D-printed model on the "connect lens part", then install the C-mount lens on the "connect lens part" with the adapter ring connected, and put it into the "fix lens part", adjust the flange distance to a suitable position, then glue it securely, make it light-proof and then it can be used. This model is only a rough measurement model, and has not been validated by actual printing, and it is uncertain whether the Nokia 1020 phone will still work properly after the lens group is removed.