Search models, users, collections, and posts
Flagholder
Print Profile(3)
0.6mm nozzle, 0.3mm layer, 3 walls, 100% infill
Designer
4.3 h
2 plates
nozzle 0.4, ABS, 0.2mm layer, 3 walls, 100% infill
Designer
7.3 h
2 plates
nozzle 0.4, PETG, 0.2mm layer, 3 walls, 100% infill
Designer
5.4 h
2 plates
Open in Bambu Studio
Boost
0
2
0
0
4
2
Released
Description
Content has been automatically translated.
- Purpose:
Create a simple, robust balcony flag holder – meaning a holder you can screw onto the outside of the balcony railing It must withstand weather, but also be easy to assemble/disassemble - Design requirements:
- Mounting on the outside of the balcony – attached with screws through the bracket
- Must have a tube holder at the correct angle (classic flag angle of approximately 45°)
- The tube must accommodate a standard flagpole (2 m / standard balcony flag)
- The holder must have a solid baseplate against the railing
- Can be printed in PETG or ASA to withstand sun, rain, and frost
- Possibility of adding drainage holes at the bottom to prevent water accumulation
- Material choice:
- PETG (cheap and strong, moisture-resistant)
- ASA (better UV resistance – ideal if the flag is often outdoors)
- Construction:
- A surface that is screwed to the railing
- A cylinder or half-cylinder with an inner diameter adapted to the flagpole
- Angled at 45°
- Optionally, a small clamping system or screw to hold the pole extra securely
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)