Japan Racing wheels center caps

Japan Racing wheels center caps 

The JR SL01 wheel center cap consists of a painted aluminum top and a plastic lower carrier. It’s fixed with double-sided tape. The lower plastic carrier broke, so I modeled it, which means you don’t need to buy a whole new cap.

To achieve adequate strength, it is recommended to print it in an upright position!

I used automotive-grade double-sided tape. If you drive sportily, it’s better to 3D print the part in ABS or ASA, since PETG can melt under heavy braking due to the heat.”

Material: PETG,ABS,ASA  

If there is a size problem, use the Slace function.

- If it's small -> you increase by 1-2%

- If it's big -> reduce it by 1-2%