H2 Series Cutting Module Gridfinity Bins

These models are for 4x2 and 4x3 Gridfinity-compatible bins to hold the H2D Cutting Module and accessories when they are not in use.  The original model has individual compartments for the Cutting Module, the Pen Holder attachment, up to six Fine Point Blades, and the Bambu Lab Blade Holder Unloader Tool.  Version 2 added a compartment for an extra Bambu Lab Pen Fixture.  

Version 3 adds another Pen Fixture compartment and updated them to support Pen Adapters by mcmaven, adds a compartment for the Pen Guide by mcmaven, and adds a storage spot for the magnetic blade cutting cylinder when not in use.  And Version 3 Plus increases the bin to 4x3 to add an enlarged pen storage compartment - the pen storage compartment has the normal Gridfinity 4x1 lip configuration and supports stacking additional bins.

Some compartments can accommodate different accessories.

The model for the Bambu Lab Blade Holder Unloader Tool is available here: https://makerworld.com/en/models/1247135-bambu-blade-holder-unloader#profileId-1268909.  (Appears in Bambu Green in the photos.)

The model for the Pen Adapters by mcmaven is available here: https://makerworld.com/en/models/1795306-pen-adapter-v2?from=search#profileId-1913914.  The Pen Guide model by mcmaven is available here: https://makerworld.com/en/models/1796475-pen-guide-for-cutting-module-v2?from=search#profileId-1915284.  (Both of these appear in Black in the photos.) - I highly recommend both of these models if you want to make best use of the drawing capabilities of the Cutting Module.

The model for the Bambu Lab Pen Fixture is available here: https://makerworld.com/en/models/1247143-bambu-pen-fixture?from=search#profileId-1268916.  (Appears in Yellow in the photos.)

Note: All of these models were developed by importing into SolidWorks an open-source STL for a 4x2 cup with a solid fill, and for the “plus” variant, an open-source STL for a standard 4x1 cup.  All of the models enable the use of magnets or screws to mount bins, these features are included (support for 6x2mm magnets and/or M3 screws).  Each design went through numerous revisions and often involved detailed study of sliced models to identify and eliminate potential for print issues.