Days Since Incidence Heuforge

This was printed on  A1 so if you want to print it with the core xy bambus you will have to reduce the size and find another frame for the heuforge.

Size is 230mm x 230 mm.

This started as  a prank for work, but since a few people were interested in it i decided to publish it here so they can grab it.

first feel free to adjust colors all you want, my filament library is limited and those with better td filaments can produce similar results with less filament colors. 

The frame i am using is this one here https://makerworld.com/en/models/849874-modular-frame-for-1x-hueforges#profileId-797601 from StaticSX.

I have included a brace to joing the frame together without having to glue it, just use the dowels included with StaticSX's frame and attach my brace on the back. I used 4mm screws to hold it to the frame and is solid. I also included 4 braces for the sides so it can be hung ( this was for a shop so i just used wire to hang it from 2 of the side braces. they attach the same way with 4mm screws.

i included the stl files of the sample number and the number sheet so you guys can adjust x-y hole compensation so that they fit the pegs with sample number and not have to print full sheets .  peg size is 4.5 mm diameter and hole for pegs on heuforge are 5mm.

You can resize the 2 heuforges in x and y but do not change z hight on heuforges.

I put a height modifier in the numbers and the Braces so that they print first layer at .16 and remaining layers at .2.

PRINT DUCK HALF AS FOLLOWS:

rint at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 230x230mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.76mm and the Actual Thickness is 2.76mm

Filaments Used:
    #000000 PLA Esun hs Black  Transmission Distance: 0.2
    #0086d6 PLA BambuLabs Basic Cyan  Transmission Distance: 1.8
    #964b00 PLA OVERTURE BROWN TURBO PLA  Transmission Distance: 1.6
    #bd652d PLA HS SUNLU ORANGE  Transmission Distance: 5.7
    #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3
    #ababab PLA BambuLabs Basic Light Gray  Transmission Distance: 0.8
    #ed2f2e PLA PolyMaker Polyterra Lava Red  Transmission Distance: 2
    #ae0015 PLA joys and more red  Transmission Distance: 3.6
    #ffff7f PLA elegoo matte sunshine yellow  Transmission Distance: 4.8
    #f6ffe6 PLA elegoo beige  Transmission Distance: 3
    #ffffff PLA+ esun cold white  Transmission Distance: 1.6
    #00ae42 PLA BambuLab Basic BambuLab Green  Transmission Distance: 2
    #fce300 PLA BambuLab Basic Yellow  Transmission Distance: 5.2
    #ffffff PLA esun basic white  Transmission Distance: 2.7
This print uses 14 unique filaments

!!!!  It appears you have mixed filament types.  Be certain this is what you want.  !!!!!

Swap Instructions:
    Start with Black
    At layer #12 (0.6mm) swap to Cyan
    At layer #13 (0.64mm) swap to BROWN TURBO PLA
    At layer #14 (0.68mm) swap to ORANGE
    At layer #18 (0.84mm) swap to Blue Gray
    At layer #21 (0.96mm) swap to Light Gray
    At layer #23 (1.04mm) swap to Lava Red
    At layer #28 (1.24mm) swap to red
    At layer #37 (1.6mm) swap to matte sunshine yellow
    At layer #43 (1.84mm) swap to beige
    At layer #46 (1.96mm) swap to cold white
    At layer #49 (2.08mm) swap to BambuLab Green
    At layer #54 (2.28mm) swap to cold white
    At layer #58 (2.44mm) swap to Yellow
    At layer #62 (2.6mm) swap to basic white for the rest.

PRINT SIGN HALF AS FOLLOWS:

rint at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 230x230 mm in size
You may print at higher layer heights below the Base Thickness of 1.44mm
The Max allowed Thickness is 3.96mm and the Actual Thickness is 2.68mm

Filaments Used:
    #000000 PLA Esun hs Black  Transmission Distance: 0.2
    #ae0015 PLA joys and more red  Transmission Distance: 3.6
    #fce300 PLA BambuLab Basic Yellow  Transmission Distance: 5.2
    #ffffff PLA esun basic white  Transmission Distance: 2.6
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #37 (1.6mm) swap to red
    At layer #46 (1.96mm) swap to Yellow
    At layer #58 (2.44mm) swap to basic white for the rest.