Hueforge of Asta from blackclover
Print Profile(1)
Description
Boost Me (for free)
If you like my hueforges, please consider giving me a boost and a follow as it incentives me to make and upload more cool hueforges and you will be notified when i upload new models! Thank you and happy printing!
If you love my work, please consider dropping me a follow friends so you will be notified when i release new models!
If you want to sell physical copies of my prints, you are more than welcome to do so but you are required to subscribe to my patreon for commercial rights to sell physical copies of my works and you can do so with the following link, i also add new works daily or weekly onto makerworld (depending on how busy i am)
https://www.patreon.com/c/SBCCreations?utm_medium=unknown&utm_source=join_link&utm_campaign=creatorshare_creator&utm_content=copyLink
Boost Me (for free)
If you like my hueforges, please consider giving me a boost as it incentives me to make and upload more cool hueforges! Thank you!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm
The Model is 100x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Red Transmission Distance: 2.5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.72mm) swap to Jade White
At layer #14 (1.28mm) swap to Red for the rest.
Please share your pictures of your prints i would love to see how they came out and happy printing!!
The frames i use for ALL my hueforges are amazing and are not my own design at all and i take no credit at all, all credit for them go's to canadian gamer and they can be found here!
https://makerworld.com/en/models/1083539-desktop-hueforge-frame#profileId-1199615
And if i want to hang them i just super glue one of these to the back of the frame, and this is also not my design and i take no credit for it, all credit go's to the creator of the model!
https://makerworld.com/en/models/840217-wall-mount-for-hueforge#profileId-807756
Please share your pictures of your prints i would love to see how they came out and happy printing friends!
The frames i use for ALL my hueforges are amazing and are not my own design at all and i take no credit at all, all credit for them go's to Canadian gamer and they can be found here!
https://makerworld.com/en/models/1083539-desktop-hueforge-frame#profileId-1199615
And if i want to hang them i just super glue one of these to the back of the frame, and this is also not my design and i take no credit for it, all credit go's to the creator of the model!
https://makerworld.com/en/models/840217-wall-mount-for-hueforge#profileId-807756
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)