EDC Cycle Triangle Fidget Spinner

Personal Compendium No. 79, Difficulty: ⭐⭐⭐
Original author: LARK

Lark Reincarnation. Optimized for printing, the overall design can be described as beautiful, combining the aesthetics of streamlines and angles, and the grooves are also very convenient for gripping

For PETG printing, adhesive spray is a must, otherwise, failure is highly likely!

Regular plate 1-3, plates 4-5 are special hollow interlocking parts, use as needed

print profile 2 is a scaled-down version with a more compact structure, it uses 8mm steel balls for weighting, you need to prepare 6 additional 8mm steel balls

• Accessories to prepare (for print profile 1):

  • 1 high-quality R188 bearing
  • 6 10mm steel balls for weighting
  • 6 M3*4 cup head hex screws
  • 1 pair of M3*16 hex screws and nuts
  • 6 2mm*8mm dowel pins

   

• Parts overview:

  

   

• Assembly steps:

  ① Insert the R188 bearing, 6 10mm steel balls, and 6 2mm*8mm dowel pins into the two main body pieces, then combine them to form the complete main body

  ② Install 6 M3*4 cup head hex screws into the reserved holes and tighten them with a screwdriver

  ③ Place the M3*16 hex screws and nuts into the corresponding hexagonal interlocking positions, then cover with the interlocking patch

  ④ Connect the male and female interlocking parts, tighten, and the assembly is complete