Golf - Putting alignment aid

An alignment plate for putting practice & training to hone your skills on the greens of the golf course while safely at home or practice green.

Simply place the mat and secure with a couple of tees (flush fit into the middle and rear holes), add some tees or the 'peg' model into the front holes - choose from 3 positions to control the width of your accuracy. Add a golf ball in the location slot and put away using the alignment lines. Can also be used on carpet with just the pegs and/or blocks. Includes a central tee hole to pivot for aligning to a longer distance target. The 'blocks' can be added with the bumpers printed in TPU to protect your putter if you're super precious about your putter - these help check your putter face is square on impact.

No supports needed.

The plate can be printed in 2 tones as shown in the pics - use the colour plate or stop and change colour at 3mm height (layer 15 if using 0.2mm layers).

Like my work, shout me a coffee to fuel my next design here: https://ko-fi.com/gbombadon

Commercial license with "Carbon Tier" membership available for this model here: https://ko-fi.com/gbombadon