Keurig K-cup under Cabinet mount - Free 3D Print Model

Search models, users, collections, and posts

UncleBumblefuk

Household>Decor

IP Report

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

2pc kcup mount. roughly 135mm each

Designer

1 h

1 plate

4.9(43)

1pc K-cup mount, 270mm long. holds 5 k-cups.

Designer

1.2 h

1 plate

4.9(9)

One piece 200mm long

1.1 h

1 plate

5.0(8)

Open in Bambu Studio

Boost

190

477

857

601

Released

Description

👋 Hey, I'm UncleBumblefuk — I design practical, no-nonsense prints for the workshop. Think Gridfinity organizers, tool holders, jigs, and shop accessories. If it makes your bench or garage more functional, that's my jam. All models are free — if something works for you, hit that Boost Me button at the top of the page! Every boost helps me keep designing. 🛠️ ⚡

Mount horizontally under a cabinet or vertically on a cabinet door. I used double sided tape to mount the holders.

If you like this design and want to support me, give this design like.

And if your in a generous mood, please (click on the little rocket 🚀 or the "BOOST" button) 🙏👍 ♥ Thank you ♥

All designs are released under Creative Commons (Attribution-NonCommercial-ShareAlike). Print them, share them — just keep it free and give credit. Got a request or something that needs improving? Drop a comment — I read them all.

Comment & Rating (85)

@RoadShow

Boosted

Very nice design. Apparently using something similar in my cabinets, but your design looks like it would make it easier to load the k-cups. Is it possible to get an STL of both pieces as a single STL? It will fit on my plate diagonally without having to be joined like a puzzle. For some reason I'm getting mesh Boolean errors in my slicer when I try to join them as one solid piece without printing like two separate parts. Thank you!

The designer has replied

@UncleBumblefuk

Thanks, they do slide in/out easily. Some pods do have slightly more air in them, which creates a little more friction. Thanks for the boosts!

@RoadShow

Boosted

Replying to @UncleBumblefuk :

thanks. Do you have a one piece version without the middle joint?

@UncleBumblefuk

Replying to @RoadShow :

I do, I’ll add it my profile tonight.

@Q50_Drew

Print Profile

2pc kcup mount. roughly 135mm each

Printed quickly and holds my k cups exactly where I want them. Thank you!

@bitbanger

I ended up slicing dicing and stretching this but it worked out in the end so thanks to the creator. I wanted them longer, and in one piece for the depth of my cabinet. And I stretched slightly in +Z because some of my k-cups have a "puffy" top and I wanted to be able to (more) effortlessly refill. For mounting, I tried 3M VHB, Scotch double sided, neither wanted to stick to my PLA+. So ended up using gel super glue + activator, and a few screws for good measure. Print time is by default pretty long due to the overhangs. The four shown ea/240mm long took about 3.5hrs on stock 0.2mm profile.

The designer has replied

@UncleBumblefuk

these were originally one piece that fit on my Creality bed. Split it down to fit a smaller bed. The tape I used was Xfasten double side woodworking tape. I’ve had no issues with sticking to pla or petg.

(Edited)