Bicycle Spoke / Valve Propeller spin

🚴💨 Spin Your Ride – Bicycle Spoke / Valve Propeller Fun! 🌀

Why just ride when you can fly?

This 3D-printed propeller spoke/valve cover turns your bicycle into a mini aircraft (well… in spirit at least😉).
As you ride, the propeller spins freely in the wind – bringing smiles to you and everyone you pass.
 

Here’s the deal – this is mostly about fun.

Currently available for spoke and two valve types + propeller:

• Spoke 2.0 - 2.2 mm
• Presta / Dunlop
• Schrader

Four-/three-part print: PETG and 0.15 mm layer height recommended.

• Choose between Propeller or Propeller2 and 2 or 3 blades
  3 blades spins faster with only 1.5 grams - see picture
• Matching Spoke (Axis + Fastener) or valve adapter for Presta/Dunlop or Schrader
• Propeller Cap – fix with a tiny drop of super glue (seriously, tiny – or it won’t spin!)
  
  

💡 Pro tip:
After printing the valve, you might need to lightly sand the axle with fine sandpaper or a nail file so the propeller spins smoothly.

Warning: A real eye-catcher on the street, and you might even get people asking about it while you’re waiting at a red light. 🚦

--> Feel free to check out my other designs here:
https://makerworld.com/en/@Toni_ThesBer/upload
 

Happy printing and ride
Toni :-)