logitech g923 g29 g920 handbrake

This design includes a handbrake lever and knob, intended for use with a pedal.

The lever attaches to the pedal with the original screws; no others are needed. For the knob's screw, an M3x20 screw and its corresponding nut are required.

The knob fits quite snugly, making the screw almost unnecessary.

To install it, I sacrificed the clutch; in my case, I had a spare pedal, so I used it. I disassembled the pedal set to extend the clutch's signal cables to the handbrake's position.

Since my playseat has the shifter mount next to the seat, I made my handbrake lever long.  

If you want a modification to adapt it to your playseat, write to me, and I will do it without a problem.

This design is intended for use only with video games, not for use in a vehicle.