Hueforge Kurama (Yu-Yu Hakusho)
Print Profile(1)
Description
My first attempt at a hueforge print. Hopefully you like it!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm
Filaments Used:
#000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6
#00ae42 PLA BambuLab Basic BambuLab Green Transmission Distance: 2
#9d2235 PLA BambuLab Basic Maroon Red Transmission Distance: 1.6
#b15533 PLA BambuLab Matte Terracotta Transmission Distance: 1
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 5 unique filaments
Swap Instructions:
Start with Charcoal
At layer #9 (0.8mm) swap to BambuLab Green
At layer #11 (0.96mm) swap to Maroon Red
At layer #16 (1.36mm) swap to Terracotta
At layer #21 (1.76mm) swap to Jade White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)