Search models, users, collections, and posts
1/700 Flyhawk Kelly Base
IP Report
Print Profile(1)
0.12mm layer, 2 walls, 15% infill
Designer
16 min
1 plate
Open in Bambu Studio
Boost
48
90
7
6
148
15
Released
Description
1/700 Flyhawk Kelly ship base （NOT the ship model!). The kit does not come with one, so I decided to design one. It is very minimalistic and fast to print.
PETG is highly recommended if you want it to last. PLA would also work. Only need an M3 machine screw to lock the model to the base.
1/700 鹰翔 凯利号 底座（不是船模！）。模型不自带底座，就自己搞了一个。这个底座很简洁，很容易打印。
如果想寿命长点，建议用PETG。当然PLA也可以。仅需一颗M3螺丝就能固定模型。
Video 视频: https://www.bilibili.com/video/BV1Wx4y1A7ni/?share_source=copy_web&vd_source=26ad18143b436598dfec3d4c7e8d6335
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (7)